Safety first, standardized operation

2025,07,29

As the core consumables in the field of industrial grinding, the safety of Grinding Wheel is directly related to production efficiency and personnel safety. Hengtai Abrasives Factory Company always puts customer safety first. Now, aiming at the life cycle management of grinding wheel products, the following key operating specifications and risk tips are issued.

Safety preparation of grinding wheel before use

1. Strict acceptance -Check whether the package is in good condition and confirm that the product has no transportation damage. -Check the nameplate parameters of grinding wheel (maximum speed, size and aperture) to ensure complete matching with the equipment.

2. Standardize storage -Store in a dry and ventilated environment to avoid high temperature, freezing or chemical pollution. -Horizontal stacking height ≤ 1m. It is forbidden to stand or hang vertically to prevent deformation.

Mandatory specification of installation process

1. Must be inspected before installation -Tap test (resin/ceramic grinding wheel): tap the side with a nonmetallic rod, and the sound is crisp and qualified; Dull/hoarse sound is immediately discarded. -Visual inspection: no cracks, gaps, uneven pores and other defects.

2. Accurate installation -The diameter of the flange must be ≥ 1/3 of the diameter of the grinding wheel, and the gasket is complete and free of oil pollution. -Tighten the nuts symmetrically and evenly. Impact wrenches are prohibited.

Safety red line in operation

protective measure -Wear protective masks, dust masks and impact glasses at all times. -The equipment protective cover must firmly cover more than 2/3 of the grinding wheel.

Author:

Mr. hengtaisd

E-mail:

market-manager@xhtabrasive.com

Phone/WhatsApp:

+86 15265977577